Misplaced Pages

Interpositive

Article snapshot taken from[REDACTED] with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Orange-based motion picture film
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
The topic of this article may not meet Misplaced Pages's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.
Find sources: "Interpositive" – news · newspapers · books · scholar · JSTOR (May 2024) (Learn how and when to remove this message)
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Interpositive" – news · newspapers · books · scholar · JSTOR (May 2024) (Learn how and when to remove this message)
(Learn how and when to remove this message)

An interpositive, intermediate positive, IP or master positive is an orange-based motion picture film with a positive image made from the edited camera negative. The orange base provides special color characteristics that allow more accurate color reproduction than if the IP had a clear base like an exhibition positive.

Description

From a traditional photographic perspective, an interpositive (short for intermediate positive) is the negative image of the original camera negative, which is an intermediate step towards creating the positive (exhibition) print.

The camera negative is projected onto negative film stock in a liquid environment - termed a wet gate - where the film stock is exposed using a contact process, so creating a like image (in effect, retaining the image in its negative -- i.e. "reversed" -- form) on negative film stock, as an intermediate step.

The interpositive historically had only one purpose, namely to be the element which is used to make the internegative.

The interpositive is made after the answer print has been approved. All lights and opticals from the answer print are repeated when striking the interpositive, and once the IP exists the original negative can be vaulted.

It is sometimes referred to as a "protection IP", since the only time the IP is touched is on the occasion of making the first or a replacement internegative. Since interpositives are used so rarely, they are usually the element that is in the best condition of all the film elements.

Interpositives are usually the element of choice for film-to-tape transfers:

  1. They are usually in better physical condition than the other film elements. The original camera negative is typically checkerboarded on several rolls, or may be chemically unstable if stored improperly.
  2. They are very low-contrast and therefore help to preserve shadow detail.
  3. Scratches or dirt on the IP appear as black defects on the transfer, which are generally less objectionable than white defects, which would be the case if the camera negative or internegative were used.

Photographers who create photographic art by contact printing, such as Platinum or AZO, need interpositives in order to create large negatives. The final artwork has the size of the contact negative produced. Interpositives are also the best means of archiving or copying old image libraries. Reversal B&W processing can also be achieved from an interpositive by means of various kits and published recipes.

See also

References

  1. "INTERPOSITIVE". National Film and Sound Archive of Australia. May 2, 2024.


Stub icon

This film technology article is a stub. You can help Misplaced Pages by expanding it.

Categories:
Interpositive Add topic